ADTRAN 4202023L2 Bedienungsanleitung PDF herunterladen (Seite 31)

Chapter 3 Operation

There are five methods of configuration for the Smart 16e Shelf: a VT100 terminal, a DATAMATE (part

number 1200045L1), SLIP, async PPP, and Ethernet 10/100BaseT.

1. VT100 TERMINAL

Local Configuration

The Smart 16e Shelf may be configured by attaching the VT100 compatible terminal or equivalent to the

DTE/DCE EIA 232 port on the rear of the Smart 16e Shelf controller card. The terminal must be set to line

wrap off, flow control off, and VT100 mode, 8-bit character size, no parity, and one stop bit. If enabled,

the password parameter protects the terminal interface from unauthorized configuration.

The connection to a terminal is made through the EIA-232 DB-9 connector on the rear

SMART 16e AC/DC

POWER I/F

segment (see Figure 7). This connection is used for both local and remote configuration.

Figure 7. Local Configuration

SMART 16e

POWER I/F

ALARM

COM

250V

3AG

115VAC/60 HZ

2.5 AMP

10 BASE T

FUSE

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

Keine Kommentare

ADTRAN 4202023L2 Bedienungsanleitung Seite 31