ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 266)

100

101

IKE Client Command Set Command Reference Guide

IKE CLIENT COMMAND SET

To activate the IKE Client command set, enter the crypto ike client command at the Global Configuration

Mode prompt. For example:

Router>

enable

Router#

configure terminal

Router(config)#

crypto ike client configuration pool

ConfigPool1

Router(config-ike-client-pool)#

The following commands are common to multiple command sets and are covered in a centralized section

of this guide. For more information, refer to the sections listed below:

do on page 558

end on page 559

exit on page 560

All other commands for this command set are described in this section in alphabetical order.

dns-server <address1> <address2> on page 267

ip-range <start ip> <end ip> on page 268

netbios-name-server <address1> <address2> on page 269

For VPN configuration example scripts, refer to the technical support note

Configuring VPN located on the NetVanta 3000 Series System Manual CD provided with

your unit.

1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 266

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing