Adtran 1000R Series Bedienungsanleitung PDF herunterladen (Seite 123)

Command Reference Guide Enable Mode Command Set

debug ip igmp <group-address>

Use the debug ip igmp command to enable debug messages for Internet Group Management Protocol

(IGMP) transactions (including helper activity). Debug messages are displayed (real time) on the terminal

(or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

<group-address> Optional. Specifies the

IP address of a multicast group.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series

units.

Command History

Release 7.1 Command was introduced.

Usage Examples

The following example enables IGMP debug messages for the specified multicast group:

>enable

#debug ip igmp 224.1.1.1

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 136 137

Keine Kommentare

Adtran 1000R Series Bedienungsanleitung Seite 123