ADTRAN 1200080L1#HS Bedienungsanleitung PDF herunterladen (Seite 13)

Chapter 2. Installation

61200.080L1-1 FXS+ Dual Voice Option Module 9

Modules

Without

Hot Replaceable Label on Back Panel

Power to the TSU 100/600 must be Off when installing

or removing the FXS+ Dual Voice option module without

a Hot Replaceable label on the back panel.

Placement of the Option Module

Figure 2-1 represents the action required for proper

placement of the option module.

1. Remove cover plate from the TSU 100/600 rear

panel.

2. Slide option module into the rear panel until it is

positioned firmly against the front of the TSU 100/6 00.

3. Fasten thumbscrews at both edges of the option

module.

Figure 2-1

Installing Option Module

Power Connection

Each FXS+ module derives power from the base TSU

100/600 unit. Power to the TSU 100/600 is supplied by a

captive eight-foot power cord.

Cover Plate

Option Module

TSU 100/600

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

Keine Kommentare

ADTRAN 1200080L1#HS Bedienungsanleitung Seite 13