ADTRAN XRT Installationshandbuch PDF herunterladen (Seite 19)

Windows NT 4.0 Installation

Windows NT Driver Installation

1. Before the LavaPort-ISA is installed in your PC, turn on your

computer and start NT, logging on as Administrator. Access

Start|Programs | Administrative Tools | Windows NT Diagnostics.

2. In the Resources Tab, you will find a listing of the IRQ’s and I/O

addresses that are currently in use by your system. Choose an

unused IRQ and I/O address and configure the LavaPort jumpers

accordingly.

3. Shut down your PC, and insert the LavaPort-ISA card into any

unused ISA slot.

4. When the PC boots, enter the BIOS setup and ensure that the PnP

OS setting is set to“NO“ or ”Disabled”.

Note: Make sure that you are installing the correct

LavaPort-ISA drivers for the appropriate operating system.

DO NOT install drivers for other Windows versions

under Windows NT

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

ADTRAN XRT Installationshandbuch Seite 19