ADTRAN NetVanta 3205 Installationsanleitung PDF herunterladen (Seite 38)

Hardware Installation Guide NetVanta 3000 Series Routers

NetVanta 3205 and NetVanta 3305

Figure 16. Repositioning the Mounting Bracket

Instructions for Wallmounting NetVanta 3205/NetVanta 3305

Step Action

Remove the mounting ears. Rotate them 90

so that the portion of the bracket with the

mounting holes is flush with the bottom of the chassis, and reattach them to the chassis (see

Figure 16).

2. Decide on a location for the NetVanta 3205/NetVanta 3305. Keep in mind that the unit needs to

be mounted at or below eye-level so that the LEDs are viewable.

Important! Mount the chassis with LEDs facing to the side as shown in Figure 17 on page 39

(not facing up or down) .

3. Prepare the mounting surface by attaching a board (typically plywood, 3/ 4" to 1" thick) to a wall

stud.

Important! Mounting to a stud ensures stability. Using sheetrock anchors may not provide

sufficient long-term stability.

4. Have someone else hold the unit in position as you install two 3/ 32" to 1/ 8" (1 1/ 2" or greater

in length) wood screws through the unit’s brackets and into the mounted board. See Figure 17

on page 39.

5. Proceed to the steps given in Supplying Power to the Unit on page 40.

To avoid damaging unit, use only the screws included in shipment when attaching

mounting ears to the chassis.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Keine Kommentare

ADTRAN NetVanta 3205 Installationsanleitung Seite 38