ADTRAN Quad T1 IMA Installationsanleitung PDF herunterladen (Seite 17)

NetVanta 6310/6330 Series Hardware Installation Guide Physical Description

NetVanta 6310 Rear Panel Design

The NetVanta 6310 rear panel is shown below.

Figure 2. NetVanta 6310 Rear Panel Layout

NetVanta 6310 Rear Panel Interfaces

NIM2/VIM2 Option Slots

The two NIM2/VIM2 option slots (labeled SLOT 1 and SLOT 2) accept a variety of NIM2/VIM2

option modules (refer to Option Modules on page 23).

PRI Interface

The PRI interface (labeled PRI 0/1) provides a single PRA/PRI/E1/T1 interface. See Table A-3 on page

43 for the PRI interface pinouts.

10/100Base-T Ethernet Interfaces

The Ethernet ports (ETH 0/1 and ETH 0/2) are RJ-45 connectors. See Table A-2 on page 43 for the

Ethernet interface pinouts. The Ethernet ports provide the following:

• 10Base-T or 100Base-T with a single connector

• Auto negotiation

• CSMA/CD

• IEEE 802.3 compatibility

CONSOLE Interface

The CONSOLE interface is an EIA-232 serial port (DCE), which provides for local management and

configuration (via a DB-9 female connector). See

Table A-1 on page 43 for the CONSOLE interface

pinouts.

Power Connection

The rear panel has a power input to the AC universal power supply. Please refer to Supplying Power to

the Unit on page 40 for connection details.

Connection directly to an external modem requires a cross-over cable.

SHDSL EFM ANNEX B

PRI 0/1

SLOT 2

SLOT 1

ETH 0/1

100-240 VAC

50/60 Hz

ETH 0/2

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 45 46

Keine Kommentare

ADTRAN Quad T1 IMA Installationsanleitung Seite 17