ADTRAN SLC-5 U-BR1TE III Bedienungsanleitung PDF herunterladen (Seite 30)

Chapter 2. Installation

2-6

TSU 100 User Manual 61202052L1-1

Chain Port Input

The control port input provides an EIA-232 input from a PC or

a modem for control of the TSU 100. You can also use it as a

chain input from another TSU 100e or the TSU 100. For more

information see Appendix C, Wiring on page C-1.

Chain Port Output

The chain port output provides an EIA-232 output to chain con-

trol to other TSUs. For more information see Appendix C, Wiring

on page C-1.

10BaseT Interface (TSU 100e only)

The 10BaseT interface provides the LAN interface for manag-

ing the TSU 100 with SNMP or T-WATCH Pro. For more infor-

mation see Appendix C, Wiring on page C-1.

Power Up Testing

When shipped from the factory, the TSU 100 is set to factory

default conditions. At the first application of power, the unit

automatically executes a memory self-test. A full self-test can

be run from the front panel, and a passcode and Unit ID may be

set using the UTIL Menu.

Self-Test

Upon a power-up, the LCD displays

Memory Test Now Testing

and the test LEDs are illuminated. When the self-test is com-

pleted with no failures detected, the OK LED lights up and the

LCD momentarily displays

Memory Test(s) Passed

. If a failure

is detected, a list of failures is displayed in the LCD window.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 135 136

Keine Kommentare

ADTRAN SLC-5 U-BR1TE III Bedienungsanleitung Seite 30