ADTRAN Stub Routing Betriebsanweisung PDF herunterladen (Seite 97)

Table 6: show interfaces Gigabit Ethernet Output Fields (continued)

Level of OutputField DescriptionField Name

brief detail extensive

none

Rewrite profile applied to incoming or outgoing frames on the outer (Out) VLAN

tag or for both the outer and inner (In) VLAN tags.

• push—An outer VLAN tag is pushed in front of the existing VLAN tag.

• pop—The outer VLAN tag of the incoming frame is removed.

• swap—The outer VLAN tag of the incoming frame is overwritten with the user

specified VLAN tag information.

• push—An outer VLAN tag is pushed in front of the existing VLAN tag.

• push-push—Two VLAN tags are pushed in from the incoming frame.

• swap-push—The outer VLAN tag of the incoming frame is replaced by a

user-specified VLAN tag value. A user-specified outer VLAN tag is pushed in

front. The outer tag becomes an inner tag in the final frame.

• swap-swap—Both the inner and the outer VLAN tags of the incoming frame

are replaced by the user specified VLAN tag value.

• pop-swap—The outer VLAN tag of the incoming frame is removed, and the

inner VLAN tag of the incoming frame is replaced by the user-specified VLAN

tag value. The inner tag becomes the outer tag in the final frame.

• pop-pop—Both the outer and inner VLAN tags of the incoming frame are

removed.

VLAN-Tag

detail extensive noneIP demultiplexing (demux) value that appears if this interface is used as the

demux underlying interface. The output is one of the following:

• Source Family Inet

• Destination Family Inet

Demux:

All levelsEncapsulation on the logical interface.Encapsulation

detail extensive noneProtocol family. Possible values are described in the “Protocol Field” section

under Common Output Fields Description.

Protocol

detail extensive noneMaximum transmission unit size on the logical interface.MTU

detail extensive noneMaximum number of MPLS labels configured for the MPLS protocol family on

the logical interface.

Maximum labels

detail extensiveNumber and rate of bytes and packets received and transmitted on the specified

interface set.

• Input bytes, Output bytes—Number of bytes received and transmitted on the

interface set. The value in this field also includes the Layer 2 overhead bytes

for ingress or egress traffic on Ethernet interfaces if you enable accounting

of Layer 2 overhead at the PIC level or the logical interface level.

• Input packets, Output packets—Number of packets received and transmitted

on the interface set.

Traffic statistics

extensiveNumber of IPv6 transit bytes and packets received and transmitted on the

logical interface if IPv6 statistics tracking is enabled.

IPv6 transit

statistics

extensiveNumber and rate of bytes and packets destined to the routing device.Local statistics

Chapter 5: Monitoring Commands

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 131 132

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Betriebsanweisung Seite 97

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing