ADTRAN Tracer TRACER 2 x E1 Bedienungsanleitung PDF herunterladen (Seite 79)

Table 4: Channelized E1 and Channelized E1 IQ show interfaces Output Fields (continued)

Level of OutputField DescriptionField Name

detail extensive noneBERT (bit error rate test) checks the quality of the line. This output appears

only when a BERT is run on the interface.

• BERT time period—Configured total time period that the BERT is to run.

• Elapsed—Actual time elapsed since the start of the BERT (in seconds).

• Induced error rate—Configured rate at which the bit errors are induced in the

BERT pattern.

• Algorithm—Type of algorithm selected for the BERT.

DSx BERT

configuration

extensiveInformation about the configuration of the Packet Forwarding Engine:

• Destination slot—FPC slot number.

• PLP byte—Packet Level Protocol byte.

Packet Forwarding

Engine

configuration

extensiveInformation about the CoS queue for the physical interface.

• CoS transmit queue—Queue number and its associated user-configured

forwarding class name.

• Bandwidth %—Percentage of bandwidth allocated to the queue.

• Bandwidth bps—Bandwidth allocated to the queue (in bps).

• Buffer %—Percentage of buffer space allocated to the queue.

• Buffer usec—Amount of buffer space allocated to the queue, in microseconds.

This value is nonzero only if the buffer size is configured in terms of time.

• Priority—Queue priority: low or high.

• Limit—Displayed if rate limiting is configured for the queue. Possible values

are none and exact. If exact is configured, the queue transmits only up to the

configured bandwidth, even if excess bandwidth is available. If none is

configured, the queue transmits beyond the configured bandwidth if

bandwidth is available.

CoS information

Logical Interface

All levelsName of the logical interface.Logical interface

detail extensive noneLogical interface index number, which reflects its initialization sequence.Index

detail extensive noneLogical interface SNMP interface index number.SNMP ifIndex

detail extensiveUnique number for use by Juniper Networks technical support only.Generation

All levelsInformation about the logical interface. Possible values are described in the

“Logical Interface Flags” section under Common Output Fields Description.

Flags

All levelsEncapsulation on the logical interface.Encapsulation

None specifiedNumber of packets received on the logical interface.Input packets

None specifiedNumber of packets transmitted on the logical interface.Output packets

Chapter 5: Monitoring Commands

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 127 128

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Tracer TRACER 2 x E1 Bedienungsanleitung Seite 79

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Tracer TRACER 2 x E1