ADTRAN 850 Bedienungsanleitung PDF herunterladen (Seite 25)

61200375L1-1

TA 850

TA 850 SDSL RCU UIG/61200377L1-31A

Page 25 of 76

>Ping

Allows you to send pings (ICMP requests) to hosts. The following items are under this menu:

Start/Stop

Activator to start and cancel a ping test.

Host Address

IP address or domain name (if DNS is configured) of device to receive the ping.

Size (40-1500)

Total size of the ping to send. Range is 40 (def) to 1500 bytes.

# of Packets

Total packets to send every 2 seconds. Setting this to

allows the client to ping continuously.

#Transmits

Total packets sent (read only).

# Receives

Total packets received (read only).

%Loss

Percentage loss based on ping returned from host (read only).

Configuring WAN Settings

>DSLAM Type

Set this to the type of DSLAM the TA 850 will be connecting to. The TA 850 supports the Copper Mountain CE 150,

ADTRAN TA 3000, Nokia D50, and Lucent Stinger DSLAMs.

>Layer One Interface

This is the physical layer protocol used to connect the DSLAM to the TA 850.

>Layer Two Protocol

This is the data link layer protocol used to connect the DSLAM to the TA 850. This is selected appropriately for each

DSLAM. The Layer 2 menus change according to this selection. If your DSLAM supports ATM, refer to ATM Config

on page 26. For Frame Relay, refer to Frame Relay on page 27.

Only one ping session can be active at a time.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Keine Kommentare

ADTRAN 850 Bedienungsanleitung Seite 25