ADTRAN FNID Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Vernetzung ADTRAN FNID herunter. View - ADTRAN Support Community Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 9
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
1Section 61150043L1-5, Issue C61150043L1-5C
MODEL T400/T200 REPEATER HOUSING
LIST 1 AND LIST 2
INSTALLATION/MAINTENANCE
PRACTICES
Section 61150043L1-5
Issue 3, October 1998
L1 CLEI # DDMOAD01MA
L2 CLEI # DDMOBD01MA
Contents
1. GENERAL ........................................................................... 1
2. INSTALLATION................................................................. 2
3. MAINTENANCE ................................................................ 8
4. WARRANTY AND CUSTOMER SERVICE .................... 9
Figures
Figure 1. ADTRAN Repeater Housing............................. 1
Figure 2. Repeater Housing Assembly ............................. 2
Figure 3. Location of Security Box, Valves,
Order Wires, and Ground Cable on
Base Bottom....................................................... 3
Figure 4. Mounting Clearances ......................................... 4
Figure 5. Guide for Mounting Bracket Holes ................... 4
Figure 6. Circuit Pack Connections .................................. 6
Figure 7. Hang Clamp over the Bracket ........................... 7
Figure 8. Support Case Cover Label................................. 7
Figure 9. Replacing Surge Arrestors ................................ 9
Tables
Table A. Repeater Housing Capacity Specifications............ 4
Table B. Circuit Technology Wiring Chart .......................... 5
Table C. Quick Reference for Proper Tightening ................ 8
Table D. Replacement Parts .................................................. 8
Figure 1. ADTRAN Repeater Housing
1. GENERAL
This practice provides installation and maintenance
information for the ADTRAN Repeater Housing,
part number 1150043, List 1 and List 2. Figure 1
shows a view of the Repeater Housing mounted on a
pole.
Features
Basic features of the LRH II-30AT, part number
1150043L1, include:
Four slots for T400 or T200 circuits
40-foot stub with air core cable
Local or remote pressurization
Houses line-powered HDSL HRE, HTU-R, FNID,
BRIDLE-R, or Total Reach TRI-R circuit
technologies
Basic features of the LRH II-30FT, part number
1150043L2, include:
Four slots for T400 or T200 circuits
40-foot stub with gel-filled core cable
Local pressurization
Houses line-powered HDSL HRE, HTU-R, FNID,
BRIDLE-R, or Total Reach TRI-R circuit
technologies
The Repeater Housing is a sealed, pressurized
apparatus case designed to house one to four line-
powered T400 or T200 circuit packs, depending on
the model used. The housing may be mounted on a
pole, in a vault, on a pedestal, or in a manhole.
Seitenansicht 0
1 2 3 4 5 6 7 8 9

Inhaltsverzeichnis

Seite 1 - INSTALLATION/MAINTENANCE

1Section 61150043L1-5, Issue C61150043L1-5CMODEL T400/T200 REPEATER HOUSINGLIST 1 AND LIST 2INSTALLATION/MAINTENANCEPRACTICESSection 61150043L1-5Iss

Seite 2 - 9 P.S.I.G

2 Section 61150043L1-5, Issue 3 61150043L1-5CAll models include tamper-resistant features,replaceable surge arrestor Gas Tubes, externallyaccessible o

Seite 3

3Section 61150043L1-5, Issue C61150043L1-5CThe locations of the security box, valves, orderwires, and the ground cable are illustrated inFigure␣ 3.W

Seite 4 - 12"

4 Section 61150043L1-5, Issue 3 61150043L1-5CFollow these steps to install the housing.A. Install Mounting BracketNOTEThe Repeater Housing is designed

Seite 5

5Section 61150043L1-5, Issue C61150043L1-5CNotes:1 CP# refers to the Connector Number inside the Housing.2 NC = Not Connected3 Pin 11 of each Card

Seite 6

6 Section 61150043L1-5, Issue 3 61150043L1-5CC. Release Pressure in HousingWARNINGThis housing is shipped pressurized to preventmoisture accumulation

Seite 7 - CIRCUIT PACK #3

7Section 61150043L1-5, Issue C61150043L1-5CCAUTIONHandle the circuit packs ONLY by the frontpanel handle. Sharp pins are exposed on boththe front a

Seite 8

8 Section 61150043L1-5, Issue 3 61150043L1-5C(2) Place the dome on the base.(3) To ensure the air-tight seal provided by theO-ring, ADTRAN recommends

Seite 9

9Section 61150043L1-5, Issue C61150043L1-5CD. Release the case support by turning the fastenercounter-clockwise and tilt the circuit packsupport str

Kommentare zu diesen Handbüchern

Keine Kommentare