ADTRAN BlueSecure Controller Installationsanleitung PDF herunterladen (Seite 17)

BlueSecure™ Access Point 1800 Installation Guide

for a description of the IEC/EN60601-1 compliant power adapter.

Verify that the PWR LED stops flashing and remains on, and that the other status LEDs start

functioning as described in the section entitled

LED Indicators

4. Connect the BSAP to your Bluesocket WLAN.

You can connect the BSAP-1800 to a 10/100/1000 Mbps Ethernet through a network device

such as a hub or a switch, or to a 1000BaseT Gigabit Ethernet interface. Connect the RJ-45

Ethernet connector on the BSAP’s back panel to your network using category 5 UTP

Ethernet cable. When the BSAP and the connected device are powered on, the BSAP’s

Ethernet Link LED should light indicating a valid network connection.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Keine Kommentare

ADTRAN BlueSecure Controller Installationsanleitung Seite 17