ADTRAN BlueSecure Controller Spezifikationen PDF herunterladen (Seite 91)

100

101

Configuring Static Routes

BlueSecure™ Controller Setup and Administration Guide 4-29

To enable outbound administrator traffic from the Admin interface, a static route must be

configured. This is required because the BSC has a separate routing table for the Admin

interface than the rest of the box. Rarely, you may need to add a static route to a special

network destination that is not normally included in the routing table.



Caution: This is an advanced BSC configuration function. Do not add static routes unless

you have a thorough understanding of network and routing concepts.

To add a static route to the BSC routing table:

1. Click the Network tab in the BSC administrator console, and then click the Routing

Table tab on the Network page.

2. Select Static Route Entry from the Create drop-down list on the Network page.

The Create a static route entry page appears as shown in Figure 4-22.

3. Enter the IP address of the destination network in the Route Destination field.

Figure 4-21: Sample BSC Routing Table

Figure 4-22: Create a Static Route Entry

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 375 376

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN BlueSecure Controller Spezifikationen Seite 91

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN BlueSecure Controller