ADTRAN T1-FT1 Bedienungsanleitung PDF herunterladen

Technical Support 1-888-4ADTRAN (1-888-423-8726)

NetVanta Series

(with T1/FT1 or T1/FT1 + DSX-1 Network Interface Module)

Quick Configuration Guide

61200862L1-42B March 2005

• Category 5 - UTP cable for connecting the system to the existing network.

• VT100 terminal or PC with VT100 emulation software.

• DB-9 (male) to DB-9 (female) straight-through serial cable for configuring the unit.

Frame Relay Diagram

PPP over Fractional T1 Connection Diagram

Equipment Required

This quick configuration guide provides step-by-step instructions for configuring

your application. The configuration scripts are available on the ADTRAN OS

Documentation CD.

The configuration parameters used in the example outlined in this document are for

instructional purposes only. Please replace all underlined entries (example

) with your

specific parameters to configure your application.

Network Diagrams

Branch Office Corporate HQ

Gateway Router

NetVanta

LAN IP: 10.10.10.1 /24

192.168.72.2 /30

eth 0/1

LAN IP: 10.10.20.7 /24

PWR

STAT

VPN

WAN LAN

PWR

STAT

VPN

NetVanta 3200

WAN LAN

Router

Network IP: 10.10.20.0

Network IP: 190.72.22.0

DLCI 16

Annex D Signaling

192.168.72.1 /30

FR 1.x

FT1 1-10 (64 kbps)

Branch Office Corporate HQ

Gateway Router

NetVanta

LAN IP: 10.10.10.1 /24

eth 0/1

LAN IP:

t1 1/2

t1 1/1

10.10.20.7 /24

Network IP: 10.10.20.0

Network IP: 190.72.22.0

LAN IP: 192.168.72.2 /30

PWR

STAT

VPN

WAN LAN

PWR

STAT

VPN

NetVanta 3200

WAN LAN

Router

Point-to-Point T1

DS0s 1-10 Data, 21-24 Voice

PBX

PPP Signaling

RIP V2

192.168.72.1 /30

PPP 1

1 2 3 4 5 6 7

Inhaltsverzeichnis

Seite 1 - NetVanta Series

Technical Support 1-888-4ADTRAN (1-888-423-8726)NetVanta Series (with T1/FT1 or T1/FT1 + DSX-1 Network Interface Module)Quick Configuration Guide 612

Seite 2 - Initiate a Console Session

2 Technical Support 1-888-4ADTRAN (1-888-423-8726) 61200862L1-42BThe NetVanta may be initially accessed and managed via a console session. Refer to In

Seite 3 - Configure the Default Gateway

61200862L1-42B Technical Support 1-888-4ADTRAN (1-888-423-8726) 3The following steps demonstrate configuring a T1 network interface with DS0s 1 throug

Seite 4 - Create the Cross-Connect

4 Technical Support 1-888-4ADTRAN (1-888-423-8726) 61200862L1-42BThe following steps outline configuring a Frame Relay virtual interface (labeled 1) u

Seite 5 - Configure Dynamic Routes

61200862L1-42B Technical Support 1-888-4ADTRAN (1-888-423-8726) 5Routes may be assigned either statically or dynamically. Continue with this section t

Seite 6 - Configure Telnet Access

6 Technical Support 1-888-4ADTRAN (1-888-423-8726) 61200862L1-42BScenario 2: Dynamic Routing via RIP 1. At the (config)# prompt, enter router rip to a

Seite 7 - Save the Configuration

61200862L1-42B Technical Support 1-888-4ADTRAN (1-888-423-8726) 71. Verify that the prompt of your unit displays (config)#.2. Enter exit to leave conf