ADTRAN Express 3000 SP Spezifikationen PDF herunterladen (Seite 24)

Chapter 2. Setting Up the Express 3000 SP

2-2 Express 3000 SP User Manual 61203153L3-20

WINDOWS INSTALLATION PROCEDURE

The following Step/Action tables provide step-by-step instructions

for installing the Express 3000 SP. However, the basic installation pro-

cedure is as follows:

1. Connect and power up the hardware (see page 2-2).

2. Install the Express 3000 SP into the operating system (see page 2-

3).

3. Install the Express Configuration software (see page 2-4).

Connecting the Hardware: Windows

As the first step in getting your Express 3000 SP up and running, in-

stall the hardware. To ensure success, closely follow the instructions

below—particularly those relating to installing the cables.

Windows Instructions for Connecting the Hardware

Step Action

1 Connect the Express 3000 SP to the PC:

With the computer’s power off and using an appropriate serial

cable (this serial cable is not provided—see Table 1-1 on

page 1-3), connect the EIA-232 port on the Express 3000 SP

to an available COM port on the computer.

2 Power on the Express 3000 SP:

Plug the Express 3000 SP power supply cord into the port on

the unit labeled

PWR

. Plug the other end into an electrical

outlet. The Express 3000 SP is now powered on.

3 Connect the Express 3000 SP to the ISDN line:

Plug one end of an RJ-11 cable into the jack on the rear of the

Express 3000 SP labeled

ISDN

; plug the other end of the

cable into the ISDN telephone wall jack.

4 Power on the computer.

5 Insert the provided Express 3000 SP CD-ROM into the

CD-ROM drive.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 117 118

Keine Kommentare

ADTRAN Express 3000 SP Spezifikationen Seite 24