ADTRAN NetVanta 160 Bedienungsanleitung PDF herunterladen (Seite 8)

NetVanta 160 Series Wireless Configuration Guide Configuring the AOS AP

Accessing the Configuration Wizard

Once connected to the GUI, expand the Data tab on the left side of the menu if not expanded already.

Navigate to Data > Wireless > AC/AP Discovery

to gain access to the configurations of the AC and APs.

Select AC/AP

Discovery to

enter access

point

configuration

Figure 1. Wireless Menu

The AC must be enabled to automatically detect APs. To enable the AC, check the box by Access

Controller at the top of the menu and select Apply.

Select Access Controller to enable the AC.

Figure 2. Access Controller Menu

Once the AC is enabled, it will search for nearby APs. When APs are detected by the AC, they will appear

at the bottom in the Dynamically Discovered Access Points portion of the menu (see Figure 3). The

APs can be manually added to the AC. The wizard is only for the configuration of APs that

are automatically detected.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 57 58

Keine Kommentare

ADTRAN NetVanta 160 Bedienungsanleitung Seite 8