ADTRAN T1-FT1 Bedienungsanleitung PDF herunterladen (Seite 6)

6 Technical Support 1-888-4ADTRAN (1-888-423-8726) 61200862L1-42B

Scenario 2: Dynamic Routing via RIP

1. At the (config)# prompt, enter router rip to activate the RIP configuration mode. Your prompt

should now display (config-rip)#.

2. Enter version 2 to globally define RIP version 2 on all interfaces.

3. Specify the networks:

Corporate HQ Router

(config-rip)#network 10.10.10.0 255.255.255.0

(config-rip)#network 192.168.72.0 255.255.255.252

Branch Office Router

(config-rip)#network 10.10.20.0 255.255.255.0

(config-rip)#network 192.168.72.0 255.255.255.252

4. Enter exit to return to the Global Configuration mode.

1. Verify that the prompt of your unit displays (config)#.

2. Enter enable password word

to set the Enable Security mode password.

3. Enter enable password md5 word

to encrypt the enable password using MD5 encryption.

The following steps show how to access the Telnet configuration parameters and change the

password. The default password for initializing a Telnet session is password (all lowercase). For

security purposes, change the password to something unique. For this example, replace the

underlined word

with a password of your choosing. To configure more than one Telnet session,

repeat Steps 2 and 3 below, using incrementing labels. The NetVanta supports five Telnet

sessions (0 through 4).

1. Verify that the prompt of your unit displays (config)#.

2. Enter line telnet 0 4 to change the configuration parameters for the Telnet session.

3. Enter password word

to change the login password for the Telnet session.

4. Enter exit to return to the Global Configuration mode.

Set the Enable Security Mode Password

The Enable Security mode passwords are case sensitive.

Configure Telnet Access

An enable security mode password and the Ethernet port parameters must be defined

before configured Telnet sessions are activated. Refer to

Configure the Ethernet Port

Parameters

on page 2 and Set the Enable Security Mode Password on page 6 for

more information.

1 2 3 4 5 6 7

Keine Kommentare

ADTRAN T1-FT1 Bedienungsanleitung Seite 6