ADTRAN TRACER 6000 SERIES Anleitung zur Fehlerbehebung PDF herunterladen (Seite 33)

TRACER 6000 Series Integrated System Manual Section 3 Engineering Guidelines

CRAFT Port (DB-9)

The CRAFT connector provides a female DB-9 terminal connection (wired as a DCE interface), used for

terminal access to the TRACER system. Table 4 shows the pinout. A null modem cable is necessary for

connecting the

CRAFT port to a modem for remote dial-up access. Table 5 shows the pinout for a null

modem cable.

4. REVIEWING THE TRACER 64X0 REAR PANEL DESIGN

Figure 3 on page 34 identifies the features of the TRACER rear panel, and Table 6 on page 34 provides a

brief description of each interface.

Table 4. CRAFT Pinout

Name

Source Description

1CD

TRACER Carrier detect

2RXDATA

TRACER Received data (to attached equipment)

3 TXDATA Attached Equipment Transmit data (from attached equipment)

4 DTR Attached Equipment Data terminal ready (unused)

5 GND Common Signal ground

6DSR

TRACER Data set ready

7 RTS Attached Equipment Request to send (unused)

8CTS

TRACER Clear to send

9RI

TRACER Ring indicator (unused)

Table 5. Null-Modem Pinout

Modem

TRACER 64x0

1 (CD) Unconnected

2 (RXD) 3 (TXD)

3 (TXD) 2 (RXD)

4 (DTR) 6 (DSR)

5 (GND) 5 (GND)

6 (DSR) 4 (DTR)

7 (RTS) 8 (CTS)

8 (CTS) 7 (RTS)

9 (RI) Unconnected

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 131 132

Keine Kommentare

ADTRAN TRACER 6000 SERIES Anleitung zur Fehlerbehebung Seite 33