ADTRAN 600R Spezifikationen PDF herunterladen (Seite 158)

Section 5 DLP-009 Total Access 600R System Manual

DLP-009

Saving Configuration using TFTP Server on Local Network

1. Connect to the unit using the 10/100BASET interface.

If you are not already connected to the unit’s 10/100BASET port using Telnet client software, use the

procedure in DLP-006, Telnetting to the Unit, to connect to the unit.

2. Verify the TFTP server is running on the network.

3. Go to the S

YSTEM UTILITY menu and select the CONFIGURATION TRANSFER menu; press <Enter>.

4. Verify the T

RANSFER METHOD is set to TFTP.

5. Set the TFTP S

ERVER IP ADDRESS to the IP address of the machine running the TFTP Server

Program.

6. Change TFTP S

ERVER FILENAME to a unique filename. This will be the name of the configuration file

saved to the remote server. An example filename would be ta_iad.cfg.

Some TFTP servers constrain the format of the filename depending on the operating system of the

server. For example, a TFTP server running on a PC under Windows 3.1 may only permit 8.3 format

filenames (8 characters, period and three extension characters).

7. Select the SAVE CONFIG REMOTELY menu field and press <Enter>.

Enter Y to confirm the request.

Perform Steps Below in the Order Listed

A TFTP server ships as part of the ADTRAN utilities. If using ADTRAN utilities, choose

TART>PROGRAMS>ADTRAN UTILITIES>TFTP SERVER to start the server.

If you are using the ADTRAN TFTP server, the IP address displays in the STATUS field.

For other TFTP servers, please refer to the appropriate documentation.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 195 196

Keine Kommentare

ADTRAN 600R Spezifikationen Seite 158