ADTRAN 1204006L1 Bedienungsanleitung PDF herunterladen (Seite 88)

Chapter 7. DTE Port Configuration

7-12 Express 5210 User Manual 61200208L1-1

Figure 7-6. Transparent BOP Menu Tree

Physical Layer Options (PHYS LYR OPTS)

Interface Type (INTERFACE)

Select the connector type for the

DTE interface. The choices are

EIA-232

and

V.35

Bit Rate

Select the operating speed of the

DTE interface.

TD Clock Source (TD CLOCK SRC)

Set the clock source to

NTERNAL

XTERNAL

PROTOCOL TRANSPARENT BOP

INTERFACE TYPE EIA 232

PHYSICAL LAYER OPTIONS V.35

BIT RATE (selections depend on

ETWORK

speed setting)

TD CLOCK SOURCE INTERNAL

EXTERNAL

TRANSMIT IDLE CODE

FLAGS

ONES

OFF

HARDWARE FLOW CONTROL ON

PROTOCOL OPTIONS DATA FORMAT NRZ

NRZI

ADDRESS TABLE FAR END PORT NUMBER DTE PORT 1

OUTGOING DLCI DTE PORT 2

The bit rate selections vary depending on the speed selections made for the

Network

port. Also, for rates higher than 56/64 kbps, the External DCE

card is required.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 202 203

Keine Kommentare

ADTRAN 1204006L1 Bedienungsanleitung Seite 88