ADTRAN MX410 Spezifikationen PDF herunterladen (Seite 43)

61189500L1-1F 4-1

Section 4

Installation

GENERAL

The first three tasks for installing and operating the MX410/MX412 are to unpack, inspect,

and install. Those tasks are detailed in this section of the manual, as well as information for

mounting the MX410/MX412 into an equipment rack or to a wall, making the proper connec-

tions to the front and rear panels, identifying the front panel indicators, and adding or

removing a Power Supply Unit (PSU).

NOTE

The PSU (P/N 1189501L1) is only available for the MX410. The

MX412 contains an internal power supply.

RECEIVING INSPECTION

Inspect the MX410/MX412 for any damage that might have occurred in shipment. If damage

is suspected, file a claim immediately with the carrier, keep the original packaging for damage

verification and/or returning the unit, and contact ADTRAN Customer Service. For warranty

information, refer to “Appendix A, Warranty”.

ADTRAN SHIPPING CONTENTS

After unpacking the MX410 or MX412, verify that the following items are present:

• MX410 and MX410 PSU

MX412

• Installation Hardware

– Blank PSU cover (P/N 1189502L1) - MX410 only

– Ground lug with nut and lock washer

– Wire-wrap post cover and screw

– Power connector

– Mounting brackets and screws for 19-inch rack or wall installation

– 23-inch mounting bracket adapter

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 133 134

Keine Kommentare

ADTRAN MX410 Spezifikationen Seite 43