ADTRAN MX410 Spezifikationen PDF herunterladen (Seite 44)

MX410/MX412 System Manual

4-2 61189500L1-1F

RACKMOUNT

For a rackmount installation, perform the following steps:

1. Ensure the mounting brackets to the MX410/MX412 are attached using the two screws

provided for each bracket.

• For 19-inch rack applications, attach the brackets with the short flange parallel with the

front of the chassis (see

Figure 4-1).

• For 23-inch rack applications, attach the brackets with the short flange parallel with the

front of the chassis and obtain 23-inch adapter mounting hardware.

2. Connect the frame ground from the frame ground lug on the upper right rear panel of the

MX410/MX412 to the equipment rack grounding screw or other appropriate grounding

connection before mounting.

3. Use the appropriate rack type screws to mount the MX410/MX412 into the rack.

CAUTION

Care should be taken to not upset the stability of the equipment

rack after installation is complete.

NOTE

The unit must be installed in accordance with the requirements of

NEC NFPA 70. When mounting the MX410/MX412 in a rack,

multiple chassis can be mounted in adjacent rack slots.

WALLMOUNT

For a wallmount installation, perform the following steps:

1. Ensure the mounting brackets to the MX410/MX412 are attached using the two screws

provided for each bracket. Attach the brackets with the short flange parallel with the bot

tom of the MX410/MX412 chassis (see Figure 4-1).

2. Connect the frame ground from the frame ground lug on the upper right rear panel of the

MX410/MX412 to an appropriate grounding connection.

3. Mount the MX410/MX412 vertically with the front panel facing to the left or right side.

Figure 4-1. Rackmount and Wallmount Orientation

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 133 134

Keine Kommentare

ADTRAN MX410 Spezifikationen Seite 44