ADTRAN 600R Spezifikationen PDF herunterladen (Seite 112)

Section 4 User Interface Guide Total Access 600R System Manual

SECURITY > FILTERS > INTERFACES (ETH[1])

Define the filters for the Ethernet interface from this menu.

SECURITY > FILTERS > INTERFACES (ETH[1]) > SUB-INTERFACE

The Ethernet sub-interface is 802.3[1.0]. This is a read-only field.

SECURITY > FILTERS > INTERFACES (ETH[1]) > SET-UP

Enable the Ethernet interface filtering and define filters from this menu.

END

the last filter to combination.

AND

logically AND this filter with the next filter in the list.

logically OR this filter with the next filter in the list.

IN FROM VC

The packets which come into the unit can be filtered in three ways:

DISABLE (DEF)

Turns off packet input filtering. No incoming packets are blocked.

BLOCK ALL

All incoming packets from the WAN are blocked except as defined

in the

SECURITY > FILTERS > INTERFACES > SETUP > IN EXCEPTIONS

list.

FORWARD ALL

No incoming packets from the WAN are blocked except as defined

in the

SECURITY > FILTERS > INTERFACES > SETUP > IN EXCEPTIONS

list.

IN EXCEPTIONS

This is a list of up to 32 filter entries which can be combined using the operations field. The

operations are performed in the order they appear on the list.

Indicates the entry number in the In Exceptions table.

ACTIVE

Turns this entry active when set to YES. Default is NO.

YPE

Selects the filter define list to reference (default is MAC):

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 195 196

Keine Kommentare

ADTRAN 600R Spezifikationen Seite 112