ADTRAN 600R Spezifikationen PDF herunterladen (Seite 48)

Section 4 User Interface Guide Total Access 600R System Manual

SYSTEM CONFIG > MANAGEMENT > TELNET ACCESS > ACCESS

Sets ACCESS to ON or OFF. The factory default value for this parameter is ON.

SYSTEM CONFIG > MANAGEMENT > TELNET ACCESS > AUTHEN METHOD

Set up the Telnet authentication method from this menu. The choices are PASSWORD, RADIUS,

PASSWORD/RADIUS, and RADIUS/PASSWORD. PASSWORD/RADIUS indicates that the unit will try Password

Authentication first, and if that fails it will try Radius Authentication.

RADIUS/PASSWORD indicates that the

unit will try Radius authentication first, and if that fails it will try Password authentication. The default is

PASSWORD.

SYSTEM CONFIG > MANAGEMENT > TELNET ACCESS > USER LIST

Add Telnet users and control the Telnet access conditions through this menu.

Display the index number of the Telnet users. Up to four users can be configured for access to the

unit. Each user can be assigned a security level and idle time.

NAME

The name is a text string of the user name for this session. You can enter up to 15 characters in this

field. The factory default is no entry in the

NAME field.

PASSWORD

When the authenticating method is password, or password radius, this text string is used for the

password. You can enter up to 30 characters in this field. The factory default is no entry in this field.

IDLE TIME (MINS)

This sets the amount of time in minutes you can be idle before you are automatically logged off. The

factory default is

10 MINUTES. The range is 1-255 minutes.

LEVEL

This is the security level granted to the user. Table 3 gives a brief description of each level. The

factory default is

FULL.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 195 196

Keine Kommentare

ADTRAN 600R Spezifikationen Seite 48