
61200.175L1-1 FSU 5622 ESP User Manual 55
Chapter 6. DTE Port Configuration
Physical Layer Options
Interface Type (CONN)
Select the connector type for the DTE interface. The choices are
V.35 and EIA-232.
Synchronous Bit Rate (RATE)
Select the operating speed of the DTE interface. The selections
are 2400, 4800, and 9600 bps and 19.2, 38.4, 56, 64, 112, 128, 168,
192, 224, 256, 280, 320, 384, 448, and 512 kbps.
Speed selections made for the Network Port affect the choices available
for the DTE ports.
Transmit Idle Code (IDLE)
Enable the FSU 5622 ESP to transmit flags or all ones. When
configured for the SDLC protocol, all ones is the recommended
setting.
Hardware Flow Control (HDW FLOW CTRL)
When configured for the SDLC protocol, this parameter is
always enabled. The FSU 5622 ESP issues RNR (receive not
ready) commands to the attached PU, temporarily disabling
transmit data to the FSU 5622 ESP.
Kommentare zu diesen Handbüchern