ADTRAN 1204006L1 Bedienungsanleitung PDF herunterladen (Seite 82)

66 FSU 5622 ESP User Manual 61200.175L1-1

Chapter 6. DTE Port Configuration

network containing transparent async data are transmitted to the

attached device with the character format set under the DTE port

physical layer options.

No control lead status or break characters are transmitted across the

frame relay network.

Physical Layer Options

Interface Type (CONN)

Select the connector type for the DTE interface. The choices are

V.35 and EIA-232.

Asynchronous Bit Rate (BAUD)

Select the operating speed to match the DTE device connected to

the FSU 5622 ESP. The selections are 2400 bps, 4800 bps, 9600

bps, 19.2 kbps, and 38.4 kbps.

Data Bits

Select the byte length to match the DTE device connected to the

FSU 5622 ESP. The choices are 7 and 8.

Parity

Select even, odd, or no parity information. Set to match the DTE

device connected to the FSU 5622 ESP.

Stop Bits

Select one or two stop bits. Set to match the DTE device con-

nected to the FSU 5622 ESP.

Hardware Flow Control (HDW FLOW CTRL)

When enabled, the FSU 5622 ESP uses CTS to temporarily

disable transmit data to the FSU 5622 ESP.

Protocol Options

Protocol options are not available when the Transparent Async

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 174 175

Keine Kommentare

ADTRAN 1204006L1 Bedienungsanleitung Seite 82