ADTRAN 1204006L1 Bedienungsanleitung PDF herunterladen (Seite 95)

61200.175L1-1 FSU 5622 ESP User Manual 79

Chapter 7. Configuring the Voice Interfaces

DLCI Map

The options for DLCI MAP vary depending on the MODE and

HOST/REM selections.

Selections Available for a Unit in Direct Mode

For direct connections, the DLCI for voice traffic must be speci-

fied. This information must be specified in both the local and

remote units. Voice data may be multiplexed with data on the

same DLCI.

L1 DLCI

Local DLCI that Line 1 voice data is carried on.

L2 DLCI

Local DLCI that Line 2 voice data is carried on.

Selections Available for a Host Unit in Switched Mode

This selection gives access to the remote extension table that is

maintained by the host unit. The table consists of a local DLCI

associated with the voice data on a remote FSU 5622 ESP and the

extension for the two voice ports connected to that DLCI. The

FSU 5622 ESP supports up to 20 DLCIs which yield a total of 40

voice ports. The front panel Next, Previous, Add, and Delete

keys are used to edit this table. The DLCI/Extension informa-

tion is communicated to the remote units over the network so

configuration is not required on the remote units.

L1 Ext

Extension for Line 1 on a remote FSU 5622 ESP.

L2 Ext

Extension for Line 2 on a remote FSU 5622 ESP.

DLCI

Local DLCI that carries L1/L2 data.

Port

When cascading units, select the port (Network, DTE 1, DTE 2)

that the voice channel resides on.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 174 175

Keine Kommentare

ADTRAN 1204006L1 Bedienungsanleitung Seite 95