ADTRAN 1204006L1 Bedienungsanleitung PDF herunterladen (Seite 78)

62 FSU 5622 ESP User Manual 61200.175L1-1

Chapter 6. DTE Port Configuration

Physical Layer Options

Interface Type (CONN)

Select the connector type for the DTE interface. The choices are

V.35 and EIA-232.

Synchronous Bit Rate (RATE)

Select the operating speed of the DTE interface.

Speed selections made for the Network Port affect the choices available

for the DTE ports.

Transmit Idle Code (IDLE)

Enable the FSU 5622 ESP to transmit flags or all ones.

Hardware Flow Control (HDW FLOW CTRL)

When configured for the Bisync protocol, this parameter is

always enabled. The FSU 5622 ESP uses commands within the

bisync protocol to temporarily disable transmit data to the FSU

5622 ESP.

Protocol Options

Emulation Type (EMUL TYPE)

For multi-point configurations, this entry defines primary or

secondary emulation. Set the FSU 5622 ESP connected to the

host to secondary and the FSU 5622 ESP connected to the 2780/

3780 controller to primary.

Line Type (LINE)

Select a point-to-point or multi-point line type.

Translation Code (TRANSLAT CODE)

Define the character set and error checking algorithm to use.

The choices are EBCDIC CRC16, ASCII CRC16, ASCII odd parity

VRC/LRC, and ASCII even parity VRC/LRC.

Data Format (FORMAT)

Set the data format used by your equipment. The choices are

non-return-to zero (NRZ) and non-return-to-zero inverted

(NRZI).

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 174 175

Keine Kommentare

ADTRAN 1204006L1 Bedienungsanleitung Seite 78