ADTRAN ATLAS 800PLUS Bedienungsanleitung PDF herunterladen (Seite 123)

Chapter 10. Dial Plan Terminal Menu

61200226L1-1 ATLAS 800

PLUS

User Manual 10-11

would almost always be correct. If less than All digits are sent, then the

prefix is defined below.

»» Outgoing Caller ID

Write Security: 3 Read Security: 5

Inserts a called ID based on the following selections.

»» Source ID

The

Source ID

field simplifies the creation of a Dial Plan in applications

where the criteria for switching calls to a certain end point is a function of

which end point originated the call.

• Default value = 0. The default ID for all end points is 0 and for all accept

# s is 0. With default values, all calls are routed based only on dialed

number.

• Multiple end points can have the same

Source ID

• When creating the

Call Accept

list, specify a

Source ID

(s) as well as a

dialed number or range of dialed numbers to accept.

Say, for example, an application requires that all calls originating from Port

1 of the Quad T1/PRI module in Slot 1 be switched to Port 4 of that same

module. Assign a unique

Source ID

(e.g., 7) to Port 1 of the module, and

then configure Port 4 to only accept calls from that unique

Source ID

(7).

»» Swap ANI/DNIS

This option swaps the ANI and DNIS numbers received from the Network.

ANI (Automatic Number Identification), is the billing number of the calling

party, and DNIS (Dialed Number Identification Service), is the called party

number.

Send as

provided

ATLAS forwards whatever ID it receives (including None).

Substitute if

not present

ATLAS inserts a User-defined ID value if no value is re-

ceived.

ID Presentation

Sends to the Network control informa-

tion for the presentation of Caller ID

(

Presentation Allowed; Presentation Re-

stricted; Number Not Available

ID Number

Value for Caller ID to be sent to the Net-

work(i.e., 256 963 8020).

Substitute

always

ATLAS always inserts the User-defined ID in place of the

value received.

ID Presentation

Same as above.

ID Number

Same as above.

This swap will cause the ATLAS switchboard to use ANI to route

the call. The accept # in the dial plan must use the ANI number, not

the DNIS number.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 209 210

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN ATLAS 800PLUS Bedienungsanleitung Seite 123

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN ATLAS 800PLUS