ADTRAN ATLAS 800PLUS Bedienungsanleitung PDF herunterladen (Seite 82)

Chapter 6. Terminal Menu and System Control

6-16 ATLAS 800

PLUS

User Manual 61200226L1-1

on how to do this). For TFTP updates, you can cancel the process by select-

ing

Cancel Update

from this field.

» Update Status

Read security: 5

Displays the status of the current firmware update. These fields are identi-

cal to those defined in Current Update Status on page 6-15.

» Config Transfer

Write security: 3; Read security: 5

Used only with TFTP transfers. Sends a file containing the ATLAS 800

PLUS

configuration to a file on a TFTP server using the TFTP protocol through the

10BaseT Ethernet port.

Config Transfer

also lets you save the

ATLAS 800

PLUS

configuration as a backup file, so you can use the same con-

figuration with multiple ATLAS 800

PLUS

units. In addition,

Config Trans-

fer

can retrieve a configuration file from a TFTP server.

To support these transfers, ADTRAN delivers a TFTP program with

ATLAS 800

PLUS

called TFTP Server. You can configure any PC running Mi-

crosoft Windows with this software, and store a configuration file. See TFTP

Server on page 13-10 for details on how to use TFTP Server.

Only one configuration transfer session (upload or download) can be active

at a time. The TCP/IP parameters are not saved or overwritten as part of an

ATLAS 800

PLUS

unit’s transferred configuration; this way, identical config-

urations can be sent to multiple units.

»» Transfer Method

Write security: 3; Read security: 5

Displays the method used to transfer the configuration file to or from a

server. Currently, you must use TFTP.

»» TFTP Server IP

Address

Write security: 3; Read security: 5

Specifies the IP address of the TFTP server. Get this number from your sys-

tem administrator.

»» TFTP Server

Filename

Write security: 3; Read security: 5

Defines the name of the configuration file that you transfer to or retrieve

from the TFTP server. The default name is

atlas.cfg

, but you can edit this

name.

»» Current Transfer

Status

Read security: 5

Indicates the current status of the update.

»» Previous Transfer

Status

Read security: 5

Indicates the status of the previous update.

Before using

Config Transfer

, the ATLAS 800

PLUS

should have a

valid IP address, subnet mask, and default gateway (if required), and

should be connected to an Ethernet network.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 209 210

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN ATLAS 800PLUS Bedienungsanleitung Seite 82

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN ATLAS 800PLUS