ADTRAN ATLAS 800PLUS Bedienungsanleitung PDF herunterladen (Seite 78)

Chapter 6. Terminal Menu and System Control

6-12 ATLAS 800

PLUS

User Manual 61200226L1-1

»» Active

Write security: 0; Read security: 5

Displays the number of users for each label that are currently logged into

the system.

» Bonding Config

Write security: 5; Read security: 5

Displays the configuration submenus available for the IMUX Nx56/64

modules. This configuration is shared among all IMUX modules.

»» TXINIT Timer

Write security: 3; Read security: 5

Specifies the length of time the originating endpoint attempts to detect the

BONDING negotiation pattern from the answering endpoint before decid-

ing the BONDING call has failed.

»» TXFA Timer

Write security: 3; Read security: 5

Specifies the length of time both endpoints attempt to detect the BONDING

frame pattern when a call is connected before deciding the BONDING call

has failed. When interoperating with other manufacturers' BONDING

equipment, it may be necessary to change this time so that it matches

TXADD01.

»» TXADD01 Timer

Write security: 3; Read security: 5

Specifies the length of time both endpoints wait for additional calls to be

connected at the end of negotiation before deciding that the BONDING call

has failed. The factory default setting is sufficient for most calls to connect,

although when dialing overseas it may be necessary to lengthen this timer

to allow for slower call routing.

»» TXDEQ Timer

Write security: 3; Read security: 5

Specifies the length of time both endpoints attempt to equalize the network

delay between the bearer channels before deciding the BONDING call has

failed.

»» TANULL Timer

Write security: 3; Read security: 5

Specifies the length of time the answering endpoint attempts to detect the

BONDING negotiation pattern from the originating endpoint before decid-

ing the BONDING call has failed. It may be necessary to shorten this timer

if the DTE equipment using the BONDING module also has timer con-

straints for completing non-BONDING parameter negotiation.

Instructions for Changing Passwords

Step Action

Select the

Password

field—a new

Password

field displays.

Type the new password in the

Enter

field.

Type the new password again in the

Confirm

field.

The password can contain up to 12 alphanumeric characters.

You can also use spaces and special characters in the

password.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 209 210

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN ATLAS 800PLUS Bedienungsanleitung Seite 78

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN ATLAS 800PLUS