ADTRAN 1200214L1 Spezifikationen Seite 61

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 176
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 60
Chapter 4. Applications
61200214L1-20 IQ Probe User Manual 4-5
Trap Manager IP Address
Enter the IP address of the SNMP manager to which the IQ Probe sends
traps. This selection is found under T
RAP
M
GR
O
PTIONS
in the S
YSTEM
por-
tion of the C
ONFIGURATION
menu.
Trap Manager Port
Enter the IQ Probe port used to transmit traps to the SNMP manager. This
selection is found under T
RAP
M
GR
O
PTIONS
in the S
YSTEM
portion of the
C
ONFIGURATION
menu.
In-Band Management
The ADTRAN IQ Probe supports three modes of in-band management us-
ing the frame relay structure of PVCs. These modes are local
(see Figure 4-3 on page 4-6), shared (see Figure 4-4 on page 4-8), and ded-
icated PVC management (see Figure 4-5 on page 4-10). All three types
support complete SNMP management as well as Telnet capabilities.
Local PVC Management
Local PVC management refers to a PVC created between the IQ Probe and
the frame relay router on the DTE interface of the IQ Probe. This type of
management is ideal when local management is needed but an ethernet
connection is not available. To support this type of management, all traffic
on the selected PVC must be RFC 1490 encapsulated, noncompressed IP
traffic.
The local PVC is sent out of the WAN serial port of the router as normal
WAN traffic and is terminated in the IQ Probe. Since the IQ Probe re-
You may assign up to five possible trap destinations in the
T
RAP
M
GR
O
PTIONS
table.
All PVC-based in-band management traffic must be
noncompressed IP and use RFC 1490 encapsulation.
Seitenansicht 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 175 176

Kommentare zu diesen Handbüchern

Keine Kommentare