ADTRAN TA 544 Bedienerhandbuch PDF herunterladen (Seite 124)

Section 5 DLP-8 Total Access 544R System Manual

Prior to the start of the upgrade, the transfer status will display IDLE. During the TFTP upload, various

status messages display in T

RANSFER STATUS to indicate progress. The following table describes

these messages.

8. When the update has successfully completed, FLASH PROGRAMMED SUCCESSFULLY will display briefly

in the T

RANSFER STATUS field. This will be followed by a LOADED CODE VER X.X.X CHKSUM = XXXX

message. Finally the T

RANSFER STATUS field will display RESETTING...

The unit will restart immediately and resume operation. After giving the unit sufficient time to reboot,

the user may Telnet back into the unit and log in.

Follow-up Procedures

Once this procedure is complete, return to the procedure which referred you to this DLP and continue with

the tasks indicated there.

Message Meaning

TRANSFERRING... [X

KB]

Indicates communication with the TFTP network server has been

established and the update file is being transferred between the unit and

the TFTP network server.

FLASH

PROGRAMMED

SUCCESSFULLY

The unit has been upgraded successfully.

LOADED CODE

VER X.X.X

CHKSUM = XXXX

Unit displays the version and checksum of the upgraded code.

RESETTING.... Unit is power cycling.

RECV ERROR Unit will display this message if server filename is incorrect.

HOST TIMEOUT Unit will display this message if TFTP server address is incorrect.

IDLE The upgrade has not yet been initiated.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 161 162

Keine Kommentare

ADTRAN TA 544 Bedienerhandbuch Seite 124