ADTRAN TA 544 Bedienerhandbuch PDF herunterladen (Seite 72)

Section 4 SHDSL RCU ATM User Interface Guide Total Access 544R System Manual

ROUTER > CONFIG > DHCP SERVER > DHCP MODE

When set to ON, the unit acts as a DHCP server and will dynamically assign IP, network mask, default

gateway, and DNS addresses to any device which transmits a broadcast DHCP request. The addresses

assigned are based on the unit’s own IP address and will be within the same network. Default is

OFF.

ROUTER > CONFIG > DHCP SERVER > DHCP RENEWAL TIME (HOURS)

The number of hours that the DHCP server should allow the device to keep its previous IP assignment,

before it is required to send a new DHCP request. The default is

0 HOURS which represents an infinite

lease.

ROUTER > CONFIG > DHCP SERVER > DOMAIN NAME

Text string used to represent the domain name used by the unit.

ROUTER > CONFIG > DHCP SERVER > PRIMARY DNS

First server to which domain name requests are sent.

Default is

0.0.0.0.

ROUTER > CONFIG > DHCP SERVER > SECONDARY DNS

Server used as a backup, in case the primary address does not respond to the request.

Default is

0.0.0.0.

ROUTER > CONFIG > DHCP SERVER > PRIMARY NBNS/WINS

Primary address of the NBNS/WINS server.

Default is

0.0.0.0.

ROUTER > CONFIG > DHCP SERVER > SECONDARY NBNS/WINS

Secondary address of the NBNS/WINS server.

Default is

0.0.0.0.

ROUTER > CONFIG > UDP RELAY

This menu configures the unit to act as a UDP relay agent for applications requiring a response from UDP

hosts that are not on the same network segment as their clients.

ROUTER > CONFIG > UDP RELAY > MODE

When this option is set to ON, the unit will act as a relay agent. Default is OFF.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 161 162

Keine Kommentare

ADTRAN TA 544 Bedienerhandbuch Seite 72