ADTRAN TA 544 Bedienerhandbuch PDF herunterladen (Seite 71)

Total Access 544R System Manual Section 4 SHDSL RCU ATM User Interface Guide

ROUTER > CONFIG > ROUTES

Configures the default gateway and static routes from this menu.

ROUTER > CONFIG > ROUTES > DEFAULT GATEWAY

The default gateway is used by the unit to send IP packets whose destination addresses are not found in the

route table. Default is

0.0.0.0.

ROUTER > CONFIG > ROUTES > STATIC ROUTES

Use this menu to enter static routes to other networks.

ROUTER > CONFIG > DHCP SERVER

Use this menu to set up the DHCP server.

NUM

Displays the index number in the static route table.

ACTIVE

Adds this static route entry to the IP routing table when set to YES and removes it (if it was previously

added) if set to

NO. Default is NO.

IP ADDRESS

The IP address of the host or network address of the device being routed to. Default is 0.0.0.0.

SUBNET MASK

Determines the bits in the previous IP address that are used. If this is to be a host route, it must be set

to all ones (255.255.255.255). Default is

0.0.0.0.

GATEWAY

The IP address of the router to receive the forwarded IP packet. Default is 0.0.0.0.

HOPS

The number of router hops required to get to the network or host. Maximum distance is 16 hops.

Default is

PRIVATE

When set to NO, the unit will advertise this static route using RIP. Setting to YES means that the route

is kept private. Default is

NO.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 161 162

Keine Kommentare

ADTRAN TA 544 Bedienerhandbuch Seite 71