ADTRAN TA 544 Bedienerhandbuch PDF herunterladen (Seite 39)

Total Access 544R System Manual Section 4 SHDSL RCU ATM User Interface Guide

SYSTEM CONFIG > SYSLOG > SYSLOG FACILITY

The choices are: LOCAL0, LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7. SYSLOG FACILITY

is the facility level for all messages forwarded from the unit to the syslog server. This allows all messages

received from the IAD to be filtered by facility level. See RFC3164: The BSD Syslog Protocol.

The remaining Syslog parameters have the following level choices:

FATAL (Highest priority)

ALERT

CRITICAL

ERROR

WA RNI NG

NOTICE

INFO

DEBUG (Lowest priority)

Every log message generated by the IAD has a reporting level priority. If the message priority is lower than

the configured priority for the destination log, the message is not forwarded to the syslog daemon. See

RFC3164: The BSD Syslog Protocol. The lower the log level, the more messages that will be generated.

Setting reporting levels to DEBUG may negatively affect the performance of the IAD, including causing

the IAD to reset.

This does not have to correspond to the facility level shown in the terminal mode option.

See SYSLOG Facility using Terminal Mode on page 40.

ADTRAN recommends using DEBUG for only short periods of time for debug purposes

only.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 161 162

Keine Kommentare

ADTRAN TA 544 Bedienerhandbuch Seite 39