ADTRAN TA 544 Bedienerhandbuch PDF herunterladen (Seite 137)

DLP-13 Saving and Loading Text Configuration Using the Terminal

Command Line

Introduction

The unit has the ability to download a text file which contains the configuration of the entire unit. This

configuration may be altered in a text editor and then uploaded to the unit.

This DLP will explain how to save and load the configuration.

Prerequisite Procedures

You must connect to the unit with a VT100 terminal session (reference DLP-1and DLP-2) or via a Telnet

session (reference DLP-6, Telnetting to the Unit).

Tools and Materials Required

• Access to a PC or other computer connected to the LAN (Telnet access only).

• VT100 compatible terminal or computer with terminal emulation software.

• Appropriate cable to connect terminal to the unit (customer-provided).

• DB-9 female to RJ-45 female adapter for connecting to the CRAFT port on the rear of the unit. This

adapter is ADTRAN-proprietary and is shipped with the unit.

• Ethernet cable from the 10/100BASET port on the unit to a hub (customer-provided).

• Use Ethernet crossover if going from the unit to a PC (customer-provided).

To prevent electrical shock, do not install equipment in a wet location or during a

lightning storm.

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 161 162

Keine Kommentare

ADTRAN TA 544 Bedienerhandbuch Seite 137