ADTRAN 1200287L1 Bedienungsanleitung PDF herunterladen (Seite 124)

Chapter 9. Transaction Language 1 (TL1)

9-8 MX2810 M13 User Manual 61185001L1-1

The MX2810 specifically uses “quoted line(s)” in the response

message of successfully executed RTRV-ALM commands. The

quoted line format is as follows:

The NTFCNCDE field will contain one of the following values:

•MN - Minor

•MJ - Major

• CR - Critical

Refer to the condition types listed in Table 9-4 on page 9-19

(MX2810 Alarm Events) for possible MX2810 CONDTYPE codes.

Autonomous Messages

The Autonomous message is sent from the NE to the OS and is not

associated with any explicit input message. The MX2810 uses this

message to exclusively report alarmed and non-alarmed events. An

autonomous message has the following general format:

Where

<cr> is the Carriage Return,

<lf> is a Line Feed,

the carrot (^) symbol represents a one space character,

<tid> is the shelf's unit ID,

<date> is the date in the form YY-MM-DD,

<time> is the time in the form HH-MM-SS,

<alarm code> is the alarm code. The alarm code indicates the

severity of the autonomous message.

<AID>:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,<OCRDAT>,<OCRTM>,<LOCN>…

^^^<tid>^<date>^<time><cr><lf>

<alarm code>^<atag>^<verb>[^<modifier>[^modifier>]]<cr><lf>

^^^"<aid>:<message parameters>"<cr><lf>;

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 203 204

Keine Kommentare

ADTRAN 1200287L1 Bedienungsanleitung Seite 124