ADTRAN 1200287L1 Bedienungsanleitung PDF herunterladen (Seite 17)

61185001L1-1 MX2810 M13 User Manual 1-1

Chapter 1

Introduction

PRODUCT OVERVIEW

The MX2810 is an M13 multiplexer that consolidates T1 and E1

signals into a T3 circuit. This unit provides a cost-effective, versatile

tool for combining independent T1s, E1s, or a combination of the

two over the same T3 circuit.

The MX2810 houses two hot-swappable controller cards which

provide 1:1 redundancy for the T1 and T3 signals, as well as the T3

connections.

Embedded SNMP (simple network management protocol) and

TELNET are available through the 10BaseT Ethernet port. Using

the Management Information Base II (MIB II), RFC 1407 standards,

and an ADTRAN enterprise MIB, the MX2810 can be configured,

monitored, and diagnosed with standard SNMP network

management programs such as Hewlett Packard’s HP OpenView™

and Cabletron’s Spectrum™. In addition, the SysLog Host Daemon

allows remote monitoring, collecting, and logging of MX2810

events in realtime. This information can be useful during

installation setups and/or troubleshooting.

Complete configuration, loopbacks, and performance monitoring

are available through SNMP, TELNET, or a VT100 terminal

interface. This connection can be made via Ethernet, a local EIA-232

link. The MX2810 is designed for installation in a 19-inch or 23-inch

rack.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 203 204

Keine Kommentare

ADTRAN 1200287L1 Bedienungsanleitung Seite 17