ADTRAN 1200287L1 Bedienungsanleitung PDF herunterladen (Seite 29)

Chapter 2. Installation and Operation

61185001L1-1 MX2810 M13 User Manual 2-7

equipment. Descriptions for these items follow the figure. Pin

assignments are given in Pinouts on page B-1.

Figure 2-3. MX2810 Rear View

E-NET Port

The

E-NET

port is an 8-pin modular connector that provides a

10BaseT ethernet LAN interface. This

LAN

interface is used for

SNMP and TELNET control.

R12

DC POWER

NTWK MGMT

–48VA –48

RET

–48 , 1A

USE COPPER CONDUCTORS ONLY

–48

RET

–48VB

DSX-1(OUT)

T1/R1

DSX-1(IN)

T/R

DSX-3

/STS-1

E-NET

OUTIN

STS-1

CLK

–

CLK

–

485

#Item Function

1 E-NET 10BaseT ethernet connection

2 External Clock Wire-wrap pins for external connection of clock

3 RS-485 Wire-wrap pins for external connection of RS-485

4 Critical/Major/Minor

Alarm Relays

Wire-wrap pins for external connection to alarm relays:

C (Common) and NO (Normally Open).

5 DSX-3/STS-1 BNC connectors for DSX-3/STS-1

6 DSX-1 64-pin female amphenol connectors for T1/E1s

7 Network Management DB-25 connector for network management

8 DC Power Connection for A and B power feeds

Connect the E-NET port to intra-building wiring only.

VT100 menus can be accessed by initiating a telnet connection to the

product’s IP address on Port Number 23 (the standard port number for

telnet connections) or on Port Number 2002.

TL1 can be accessed by initiating a connection on Port Number 3116.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 203 204

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN 1200287L1 Bedienungsanleitung Seite 29

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN 1200287L1