ADTRAN 1200287L1 Bedienungsanleitung PDF herunterladen (Seite 35)

Chapter 2. Installation and Operation

61185001L1-1 MX2810 M13 User Manual 2-13

Craft Port

The

CRAFT

port provides connection to a VT100 EIA-232

compatible interface.

Establishing Terminal Connection

To connect the MX2810 to a VT100 terminal, follow this procedure:

1. Configure the VT100 terminal for 9600, 19200, 38400, or 57600

baud, 8-bit characters, no parity, and one stop bit (xxxx, 8N1).

2. Connect the DTE port of a terminal to the DB-9 jack labeled

CRAFT

on the MX2810 front panel.

3. Initialize the terminal session.

4. Press

Enter

repeatedly until the password prompt appears.

5. Enter the username and password. The factory default

username is “

username

”. The factory default password is

“

password

”. The M

AIN

menu appears. See Figure 2-5.

6. Make selections by entering the number corresponding to the

chosen parameter. Press

ESC

on the keyboard to return to the

previous screen. End a terminal session by selecting L

OGOUT

from the M

AIN

menu or by pressing

Ctrl-C

at any time.

Only one menu session, through either Telnet or craft port, may be active

at a time. When an attempt to activate a second menu session is made,

the user will be asked if they want to disconnect the other menu session.

If “Yes” is chosen, the user (who must have “Admin” privileges) will be

required to enter a valid username and password. The new menu session

will be active at this time. The disconnected user will be notified and

provided with the username of the new user.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 203 204

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN 1200287L1 Bedienungsanleitung Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN 1200287L1