ADTRAN 1200287L1 Bedienungsanleitung PDF herunterladen (Seite 57)

Chapter 3. Configuration

61185001L1-1 MX2810 M13 User Manual 3-19

DS3 Alarm Traps (Far-End Active Cards)

DS2 Alarm Traps

Trap If enabled, the unit issues a trap when...

LOS the remote unit’s active controller card has lost

the network Rx signal

OOF the remote unit’s active controller card detects a

framing loss from the network

AIS the remote unit’s active controller card is

receiving an AIS (blue) alarm condition from the

network

IDLE the remote unit’s active controller card detects

an idle sequence from the network.

DS3 Eqpt Fail

the remote unit’s active controller card is

receiving a service-affecting equipment failure

message from the network

DS3 Eqpt Fail

NSA

the remote unit’s active controller card is

receiving a non-service-affecting equipment

failure message from the network

Comn Eqpt Fail

NSA

the remote unit’s active controller card is

receiving a common equipment failure message

from the network

Trap If enabled, the unit issues a trap when...

OOF the DS2 detects a framing loss from the network

AIS the DS2 is receiving an AIS (blue) alarm

condition from the network. AIS alarms occur

when the unit is receiving unframed all ones

RAI the DS2 is receiving an RAI (yellow) alarm from

the network. This alarm is a signal sent back

toward the source of a failed transmit circuit.

The X-bit is set to zero

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 203 204

Keine Kommentare

ADTRAN 1200287L1 Bedienungsanleitung Seite 57