ADTRAN 1200287L1 Bedienungsanleitung PDF herunterladen (Seite 139)

Chapter 9. Transaction Language 1 (TL1)

61185001L1-1 MX2810 M13 User Manual 9-23

TL1 ERROR CODES

When the MX2810 denies a received TL1 command, the Output

Response message has an associated 4-letter error code indicating

the reason for denial. Table 9-6 lists possible error codes.

TL1 Editing

TL1 editing commands allow the MX2810 to be provisioned

through a TL1 session rather than through the menu system that is

accessed using a VT100 terminal emulator. User account

information must be provisioned through the a console menu

session or TL1 session prior to initiating a TL1 session. Once a TL1

session has been initiated using the ACT-USER command

described earlier in this chapter, the TL1 editing commands may be

used. The standard format for an edit command is as follows:

• rr is T1, T2, T3, or EQPT

• <aid> is the Access Identifier

• <ctag> is a 1 to 6 character correlation tag (echoed in response)

Table 9-6. TL1 Error Codes

Error Code Description

ICNV Input, Command Not Valid

IDRG Input, Date Range

IIAC Input, Invalid Access Identifier

IITA Input, Invalid Target Identifier

IPNV Input, Parameter Not Valid

PIUI Privilege, Input User Not Valid

PLNA Privilege, Login Not Active or Insufficient

Privileges

SROF Status, Requested Operation Failed

SSRE Status, System Resources Exceeded

ED-rr::<aid>:<ctag>:::<keyword>=<value>;

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 203 204

Keine Kommentare

ADTRAN 1200287L1 Bedienungsanleitung Seite 139