ADTRAN 1200287L1 Bedienungsanleitung PDF herunterladen (Seite 70)

Chapter 3. Configuration

3-32 MX2810 M13 User Manual 61185001L1-1

select either

MMEDIATE

ESET

to immediately reset the system

CHEDULE

ESET

IME

to set a time for the system to reset.

Once the system has been reset, the new software will be

running.

Update via TFTP Server

Updating the FLASH Software via TFTP Server requires that the IP

address and file name of file to be downloaded is known. To update

the software via TFTP, follow the steps below:

1. Select

PDATE

VIA

TFTP S

ERVER

from the U

TILITIES

menu. A

new menu displays allowing you to enter the IP address and file

name of the file you want to download to the unit. Once this

information in entered, select

TART

TOP

RANSFER

2. After selecting the binary file, the TFTP transfer will begin. If

you wish to cancel a transfer in progress, press

Ctrl-x

three

times. The

ACT LED on the active card is solid amber for the

duration of TFTP transfer. The

ACT LED on the stand-by card

is blinking green.

3. If updating a unit with redundant controller cards, the active

controller will begin uploading the new code to the stand-by

controller after the XMODEM transfer has completed and the

unit has successfully loaded and programmed the new software

into its FLASH memory. If the unit does not have redundant

controller cards, go to step 5.

4. While the stand-by card is having code uploaded, the

ACT LED

on the stand-by card will be solid amber. After the code has

finished uploading to the stand-by card, the card will reset itself

and begin running the new code.

This function is available only when updating the software through the

CRAFT

port.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 203 204

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN 1200287L1 Bedienungsanleitung Seite 70

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN 1200287L1