ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 15)

100

101

Command Reference Guide Basic Mode Command Set

enable

Use the enable command (at the Basic Command Mode prompt) to enter the Enable Command Mode. Use

the disable command to exit the Enable Command Mode. See the section Enable Mode Command Set on

page 24 for more information.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

> Basic Command Mode

Command History

Release 1.1 Command was introduced.

Functional Notes

The Enable Command Mode provides access to operating and configuration parameters and should be

password protected to prevent unauthorized use. Use the

enable password

command (found in the Global

Configuration command set) to specify an Enable Command Mode password. If the password is set, access to

the Enable Commands (and all other “privileged” commands) is only granted when the correct password is

entered. See

enable password [md5] <password>

on page 159 for more information.

Usage Examples

The following example enters the Enable Command Mode and defines an Enable Command Mode password:

enable

configure terminal

(config)#

enable password ADTRAN

At the next login, the following sequence must occur:

enable

Password:

******

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing