ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 536)

100

101

Router (RIP) Configuration Command Set Command Reference Guide

passive-interface <interface>

Use the passive-interface command to disable the transmission of routing updates on the specified

interface. All routing updates received on that interface will still be processed (and advertised to other

interfaces), but no updates will be transmitted to the network connected to the specified interface. Multiple

passive-interface commands may be used to create a customized list of interfaces. Use the no form of this

command to enable the transmission of routing updates on an interface.

Syntax Description

Specifies the interface that will not transmit routing updates.

Valid interfaces include: Ethernet (eth 0/1), virtual frame relay sub-interfaces

(fr 1.16), virtual PPP interfaces (ppp 1), and loopback interfaces

Default Values

By default, RIP is not enabled.

Command Modes

(config-rip)# Router (RIP) Configuration Mode required

Command History

Release 1.1 Command was introduced

Usage Examples

The following example disables routing updates on the frame relay link (labeled 1.17) and the PPP link

(labeled 1):

(config)#

router rip

(config-rip)#

passive-interface frame-relay 1.17

(config-rip)#

passive-interface ppp 1

1 2 ... 531 532 533 534 535 536 537 538 539 540 541 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 536

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing