ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 492)

100

101

PPP Interface Configuration Command Set Command Reference Guide

snmp trap link-status

Use the snmp trap link-status command to control the SNMP variable that enables

(or disables) the interface to send SNMP traps when there is an interface status change

(ifLinkUpDownTrapEnable of RFC 2863). Use the no form of this command to disable this trap.

Syntax Description

No subcommands

Default Values

By default, the ifLinkUpDownTrapEnable OID is set to enabled for all interfaces except virtual frame relay

interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), T1 (t1 1/1), DSX-1 (t1 1/2), serial (ser

1/1), DDS (dds 1/1), virtual frame relay (fr 1), virtual PPP (ppp 1), and SHDSL

(shdsl 1/1) interfaces.

Command History

Release 1.1 Command was introduced

Functional Notes

The

snmp trap link-status

command is used to control the RFC 2863 ifLinkUpDownTrapEnable OID (OID

number 1.3.6.1.2.1.31.1.1.1.14.0).

Usage Examples

The following example disables the link-status trap on the virtual PPP interface:

(config)#

interface ppp 1

(config-ppp 1)#

no snmp trap link-status

1 2 ... 487 488 489 490 491 492 493 494 495 496 497 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 492

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing