ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 494)

100

101

Loopback Interface Configuration Command Set Command Reference Guide

LOOPBACK INTERFACE CONFIGURATION COMMAND SET

To activate the Loopback Interface Configuration command set, enter the interface loopback command at

the Global Configuration Mode prompt. For example:

Router>

enable

Router#

configure terminal

Router(config)#

interface loopback 1

Router(config-loop 1)#

The following commands are common to multiple command sets and are covered in a centralized section

of this guide. For more information, refer to the sections listed below:

alias <“text”> on page 556

description on page 557

do on page 558

end on page 559

exit on page 560

shutdown on page 561

All other commands for this command set are described in this section in alphabetical order.

access-policy <policyname> on page 495

bandwidth <value> on page 498

crypto map <mapname> on page 499

ip commands begin on page 501

loopback remote inband on page 513

mtu <size> on page 514

snmp trap link-status on page 515

1 2 ... 489 490 491 492 493 494 495 496 497 498 499 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 494

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing