
Command Reference Guide PPP Interface Configuration Command Set
61950860L1-35D © 2003 ADTRAN, Inc. 491
ppp pap sent-username <username> password <password>
Use the ppp pap sent-username/password command to configure a username and password when the
peer requires PAP PPP authentication. Use the no form of this command to remove a configured password.
For more information on PAP and CHAP functionality, see the Technology Review section for the
command ppp authentication <protocol> on page 485.
Syntax Description
<username>
Alphanumeric string up to 30 characters in length (the username is
case-sensitive)
<password>
Alphanumeric string up to 30 characters in length (the password is
case-sensitive)
Default Values
By default, there is no defined ppp pap sent-username and password.
Command Modes
(config-ppp 1)# PPP Interface Configuration Mode required
Command History
Release 1.1 Command was introduced
Usage Examples
The following example specifies a PPP PAP sent-username of
local
and a password of
my_password
:
(config)#
interface ppp 1
(config-ppp 1)#
ppp pap sent-username local password my_password
Kommentare zu diesen Handbüchern